Micro Logics

• Dual DC 0 to 30V, 3A
• Constant voltage & constant current operation
• Digital displays for voltage & current
• Adjustable current limiter
• Protection against overload & short circuit

Siglent’s SPD1305X Series Programmable Linear DC Power Supply has a 2.8 inch TFT-LCD (240 * 320) color display. The SPD1305X outputs up to 150 Watts of power and has a Voltage range of 0-30 V and Current range of 0-5 A. The Voltage resolution is 1 uV while the Current resolution is 1 mA.

Because higher currents supplied through smaller gauge wire or longer distances can cause a drop in voltage to the supplied load, the SPD1305X incorporates Remote Sensing in order to measure the actual supplied voltage at the load. The remote sensed voltage is fed back to the power supply and output voltage is adjusted almost instantaneously.

• Output Rating: AC 0 – 350 Vrms, DC 0 - ± 500 V
• Output Frequency up to 999.9 Hz
• DC Output (100% of Rated Power)
• Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
• Voltage and Current Harmonic Analysis(THDv, THDi)
• Remote Sensing Capability
• OVP, OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm.
• Support Arbitrary Waveform Function
• Output Capacity: 500VA/ 1000VA
• Customized Phase Angle for Output On/Off
• Sequence and Simulation Function(up to 10 sets)
• Interface: USB, LAN, RS-232(std.); GPIB(opt.)
• Built-in External Control I/O and External Signal Input
• Built-in Output Relay Control
• Memory Function (up to 10 sets)
• Built-in Web Server

• Compact 2U 
• Universal Mains
• Multi Ranging (Stepped) Output
• Remote sense drop, Remote shutdown 
• Analog Programming