Micro Logics

Smart Digital Multimeter, Fully Automatic with Intelligent mode.

• 6000 Counts HD Display 
• Primary & Secondary Display
• With Analog bar graph
• 600 V AC/DC
• 10 A AC/DC
• True RMS
• Capacitance Test
• Frequency Test
• Temperature Test
• Diode & Continuity Test
• NCV
• Torch
• Auto Power Off
• Data Hold
• Low Battery indicator
• Jack Prompt
• Burnt fuse Prompt
• With Holster 

• 50,000 counts, VFD display
• Dual measurement/Dual display
• Selectable measurement speeds, the maximum: 40 Readings/s for DCV
• The basic precision of DC voltage: 0.02%
• Auto/manual Ranging
• True RMS (AC，AC+DC) measurements
• 11 different measurement functions
• Max./Min., REL, MX+B, 1/X, Ref%, Compare, Hold, dB, dBm
• Standard USB device interface to connect with a computer
• Temperature measurement function (GDM-8342 only), USB storage for Data collection (GDM-8342 only)
• Optional GPIB (factory install for GDM-8342)

• GW INSTEK rolls out the new generation Dual Measurement Multimeter -- the GDM-834x series, which has two models -GDM-8341 and GDM-8342. Its exceptional features include 50,000 counts, VFD dual-display, 0.02% basic DC voltage accuracy and a USB protocol connector to provide users with measurement precision, lucid data observation, and the convenience to connect with the personal computer.

   

  The GDM-834x series not only supports the fundamental measurement items provided by general multimeters, but also equips with capacitance and temperature measurement functions. Furthermore, the GDM-834x series also provides many auxiliary functions to meet the measurement requirements for manufacturing process tests, educational experiments and testing facilities.

   

  With respect to storing and retrieving data, the GDM-834x series has two methods to offer: first, the USB flash drive storage function --- operating alone without connecting with a computer; second, USB interface (virtual COM port) and optional GPIB interface (must be installed in factory) for automatic measurement system users to conveniently save and retrieve data.

   

  • Convenient USB flash drive storage function
  • Selectable measurement speeds
  • Various measurement items and functionalities
  • Dual measurement/dual display
  • Command compatibility & Free software-remote control and data retrieving

• Measurement accuracy 0.1%
• Test Frequency : 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
• Selectable test signal level
• With DCR function
• 40000 counts for primary parameter, D/Q resolution 0.0001
• Intellectualized auto LCR function
• Constant output impedance: 100 Ohm
• Percentage display and 4-tolerance comparator: 1%, 5%, 10%, 20%
• Data-hold, Max./Min./Average value recording
• Real-time function configuration selection and working condition hold capacity
• Battery charge in startup & shutdown
• Test terminal protection function
• Standard Mini – USB interface, SCPI compatible

• AC Voltage 4 / 40 / 400 / 750V
• AC Current 400 A / 4000 A / 40mA / 400mA / 4 / 20A
• Capacitance 40 / 400nF / 4 /40 /100 uF, Temperature -20 °C ~ 1300 °C
• Frequency 9.999Hz ~ 9.999MHz
• Special Functions Diode Test, Audible Continuity, Data Hold

• Dc voltage: Range (200mv, 2v, 20 v, 200v, 600v), basic accuracy ±(0.5 percent reading +4 digits), ac voltage: Range (200mv, 2v, 20v, 200v, 600v), basic accuracy ±(0.8 percent reading + 6digits)
• Dc current: Range (200µa, 2000µa, 20ma, 200ma, 10a), basic accuracy ±(1 percent reading + 10digits), ac current: Range (200µa, 2000µa, 20 ma, 200 ma, 10a), basic accuracy ±(1.5 percent reading + 10digits), resistance: Range (200Ω, 2kΩ, 20kΩ, 200kΩ, 2mΩ, 20mΩ), basic accuracy ±(0.8 percent reading + 4digits)
• Temperature: Range -20 degree celsius ̴ 1000 degree celsius (0 degree fahrenheit ̴1832 degree fahrenheit) degree celsius and f degree selectable, input impedance in dcv and acv: 200mv range: >40 mΩ and other ranges: 10 mΩ, frequency response in ac: 50 ̴ 200 hz
• Continuity test and diode test provided, other facilities/ features: Data hold, max value hold, auto power off, low battery indication, 2 x aaa battery operation
• Accessories supplied: Holster, test leads, user manual and battery(installed/kept aside) and temperature probe

• True RMS responding
• Voltage: DC: 600 volts; AC: 600 volts; DC Accuracy: ± 0.5% + 3 digit; AC Accuracy: ± 1% + 3 digit
• Current: DC: 10 amps; AC: 10 amps; DC Accuracy: ± 1% + 3 digit; AC Accuracy: ± 1.5% + 3 digit
• Resistance: 40 M ohm; Resistance Accuracy: ± 0.9% + 3 digit
• Capacitance: 10 mF; Capacitance Accuracy: ± 1.9% + 2 digit
• CAT III 600 volts safety rated
• 6000 count true RMS measurements
• AC/DC current, AC/DC voltage, resistance, frequency, capacitance measurements
• Diode and continuity test with buzzer
• Min/max/average to record signal fluctations
• Large white LED backlight to work in poorly lit areas
• Long battery life with auto power off
• 3 year fluke india warranty and calibration certificate